Title: Hantek DSO 5072P self calibration fail [Print this page] Author: Cubbie Time: 2019-2-4 06:54 Title: Hantek DSO 5072P self calibration fail Scope is about two years old, getting self calibration failure at step 34 error 0x20001 after a 30 minute warmup.
Also in normal operation, autoset and the trigger does not seem to be working (horizontal rolling waveforms). Are there any ideas?
Thanks...Jim
Author: Han Time: 2019-2-13 11:22
This is the problem of trigger firmware,please contact the distributer to repair.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)