Title: Hantek 6074BC faulty measurement. [Print this page] Author: measureman Time: 2019-1-30 10:10 Title: Hantek 6074BC faulty measurement. Edited by measureman at 2019-1-30 10:09
Hello
Square 32khz measurement is inaccurate.
Is it possible to have a faulty instrument ?
I've made the probe compensation, but haven't used it.
There is a similar error with a 555 timer ic.
Good at low sample speed.
There is an error at a higher sample speed.
Timer ic input voltage 8.00 v
What else can be a problem if the instrument is correct ?
Author: amy Time: 2019-2-14 15:39
In the second picture, please set acquire->acquisition->peak detect, and take a picture to upload.
In the first picture, please set the volt/div to 2V and turn the capacitance on the probe to flatten square wave. Now test the fourth picture signal.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)