Edited by WisdomAugust at 2022-6-9 16:26
Digital Channels
To connect the digital probes to the device under test
1 If necessary, turn off the power supply to the device under test. Turning off the power to the device under test would only prevent damage that might occur if you accidentally short two lines together while connecting probes. You can leave the oscilloscope powered on because no voltage appears at the probes.
2 Connect the digital probe to the DIGITAL connectors on the mixed-signal oscilloscope by the Type C cable. The digital probe is keyed so you can connect it only one way. You do not need to power-off the oscilloscope.
CAUTION Probe cable for digital channels Use only the Hantek logic probe and accessory kit supplied with the mixed-signal oscilloscope.
|