Title: About duty of square wave generator [Print this page] Author: wangshuang Time: 2021-2-24 14:25 Title: About duty of square wave generator I use a dso2d15 sn: CN2048029000380, firmware: a015.
I would like your help.
I use the square wave generator.
I can change the duty cycle only for frequencies below 50KHz for higher frequencies it does not work.
it takes the frequency value / 1000 and uses it as the lower and upper limit of the duty cycle:
freq = 30KHz duty range 30% .. 70%
freq = 45KHz range dute 45% .. 55%
over 50KHz I can't make changes only 50%