Hi all
In my 2C42, the contact in the input connector of channel 1 (BNC) began to disappear.
I tried to unsolder it to check and replace it from the generator output channel. But, unfortunately, the pins with which it is soldered to the board broke.
I can't find such connectors on Aliexpress. All the connectors I can find are longer and taller than the original ones.
Tell me, please, where can I buy an original BNC connector?
10X!
发表于 2024-5-2 18:32:59
发表于 2024-5-7 11:47:21
楼主