MPO6002EDU Series Oscilloscope Guide

WisdomAugust

? Touchthe Go To LA Menu to open the digital channels menu sidebar.

WisdomAugust

AccessSystem Clock Setting Dialog

1

? Touch the lower-right corner time&date to accesssystem clock setting dialog.

?Swipe to flick through the screen, or click the up or down arrow to set year,month, day, hour, and minute.

WisdomAugust

2 ? Touchthe Year, Month, Day, Hour,Minute, or Second key in the time&date menu to display the corresponding

setting virtual keyboard.

? Input the time on the virtualkeyboard and press Enter key to set year, month,day, hour or minute.

WisdomAugust

Openthe Scale/Delay Dialog

?Touch “H” to access a dialog for changing the horizontal scale and delay values.

WisdomAugust

Accessthe Trigger Menu, and Open the Trigger Level Dialog

? Touch“T” to access a dialog for changing the trigger level value(s).

? Touch“Trigger Menu” to access the Trigger Menu.

WisdomAugust

EnterNames Using Alpha-Numeric Keypad Dialogs

Somesoftkeys open alpha-numeric dialogs that let you touch to enter names.

WisdomAugust

Parameter Setting Method

You can use the knob or enable the touch screen toset the parameters of the oscilloscope.

In the numerickeypad, rotate the V0 multifunction knob to select the parameter, then press

down the knob to select it. Then input the value or the unit. You can alsoenable the touch

screen and tap the value or unit in the numeric keypad toinput them. After you input all the

values and select the desired units, thenumeric keypad is turned off automatically. This

indicates that you havecompleted parameter setting.

Besides, afteryou have input the values, you can also press Enter directly to close the

numeric keypad. At this time, the unitof the parameter is the default unit.

In the numerickeypad, you can also perform the following operations:

* Delete theparameter value that has been input.

* Set theparameter to a maximum or minimum value (sometimes, the maximum or minimum

value are the specified one for the current state).

* Set theparameter to a default value.

* Clear theparameter input field.

WisdomAugust

AdjustTrigger Level By Dragging Trigger Level Icons

Whentrigger level selected by tap it, you can drag trigger level icons to adjustthe trigger level(s).

WisdomAugust

OscilloscopeDisplay

Theoscilloscope display contains acquired waveforms, setup information,measurement results, and the

softkey definitions.

WisdomAugust