Update the firmware of Hantek2D72/2D42/2C72/2C42

amy · 发表于 2019-8-24 16:49:48

OASJ2YSeeEhBQo1 replied at 2019-8-17 13:20
Hi Amy, Dmitrkov already posted a video, so he can reproduce the problem as well.

I've noticed th ...

Hi, the bugs have been modified in the latest firmware 2019082401.
Please check.

tesa · 发表于 2019-8-24 23:19:33

after flashing Firmware version: 2019082401 sucessfully 4 times, the firmwarenumber in menue sys info on the 2c42 is still the old one "soft: 2019060601"

pmaggi · 发表于 2019-8-25 05:56:28

The same is happening to me... updated with 2019082401 but sys info says 2019060601.
Apart from that, AWG now have a strange behaviour. All wave form apart from the square one show a pulse at the begining of the period.

pmaggi · 发表于 2019-8-25 06:22:30

I returned to version 2019031201 and the awg problem disappeared

+79003631279 · 发表于 2019-8-25 16:29:29

Edited by +79003631279 at 2019-8-25 16:39

updated 2019082401, but sysinfo reports 2019060601.

This is one of the errors in the firmware, the developers forgot to fix the number. So it was several times in the previous firmware updates.

I went back to the version 2019031201

You made a mistake, the correct stable firmware number 2019030201. I have, too, in of last version of many problems and remained on this.

gongye5776601 · 发表于 2019-8-26 09:28:53

Edited by gongye5776601 at 2019-8-26 12:11

amy replied at 2019-3-12 14:07
If you can use TTL serial port tool, please refer to the attachment to program arm1 and arm2:
http ...

Hello, I don't know if I can understand the Chinese I sent. I would like to ask you, my 2d72 hand-held oscilloscope is not on now, and the DFU mode can't go in. There is no response to disassembling batteries and inserting data lines in F1. How can I do this? I can connect with stlink after I disassemble it. I don't know what's wrong with it. Looking forward to your reply 1 Thank you.
How do I update system files with stlink?

AxGxP · 发表于 2019-8-28 01:22:44

Достали уже, со своими кривыми обновлениями...
Ничего не исправили, что просил, только новых багов наделали. В чём фишка?
Там что реально какие-то ослы работают?
Раз пять нормально спрашивал, просил хоть что-то ответить, сплошной игнор!
Я же не прошу чего-то нереального! Час работы, имея исходники...

amy · 发表于 2019-8-28 16:47:55

gongye5776601 replied at 2019-8-26 09:28
Hello, I don't know if I can understand the Chinese I sent. I would like to ask you, my 2d72 hand-h ...

Please refer this:

https://www.dropbox.com/s/xop4sn ... ram%20Arm1.zip?dl=0

gongye5776601 · 发表于 2019-8-29 08:41:12

amy replied at 2019-8-28 16:47
Please refer this:

https://www.dropbox.com/s/xop4snveegnrj2d/Hantek2000%20Program%20Arm1.zip?dl ...

Thank you very much, but I can see the file, that is, it can't be registered and logged in, so it can't be downloaded. I also need to ask if you can send it to gonggye863@sohu.com or to the forum for me.

amy · 发表于 2019-8-29 10:17:52

The mail sent to you was returned.
Please download in this link:
https://fil.email/2q9kXgRp
The files will be available for 7 days.

		自动登录	找回密码
密码			Register

Update the firmware of Hantek2D72/2D42/2C72/2C42

本帖子中包含更多资源