Hantek IDSO1070A Wi-Fi mode.

makaveledj · Post time 2017-9-14 22:16:05

Hello ! I have hanten idso1070A. For now i use wi-fi direct mode.
My question is how to connect my hantek idso1070a oscillosscope to my router? My router has a password, is it even possible to connect? Is there any menu or setting to select my router?
Thank you!

amy · Post time 2017-9-15 11:53:01

Sir, please login router management page, and view the IP address assigned by the router to the oscilloscope.
Now, open the IDSO1070 software, click "File->Advanced" to type the IP address.

makaveledj · Post time 2017-9-15 17:55:57

Thanks but you misunderstood my question.

The question is how to connect the osciloscope with the router?

amy · Post time 2017-9-16 14:11:17

makaveledj replied at 2017-9-15 17:55
Thanks but you misunderstood my question.

The question is how to connect the osciloscope with the r ...

Sir, please refer to the document to operate.

makaveledj · Post time 2017-9-16 16:02:26

Thank you, is there any other way because i dont have Iphone..... I only have android phone....

amy · Post time 2017-9-16 17:00:02

makaveledj replied at 2017-9-16 16:02
Thank you, is there any other way because i dont have Iphone..... I only have android phone....

Sir, sorry to infrom that only the IOS software supports to switch the connection mode to indirect at present.

makaveledj · Post time 2017-9-18 04:04:52

So sad to hear that. I hope it will be available for android in future. Thank you

makaveledj · Post time 2017-9-18 04:05:53

What are the buttons ISP and RST in front of the device ?

amy · Post time 2017-9-18 16:52:53

The ISP is used to program the firmware.
The RST is no practical significance.

bsv.if.ua@gmail.com · Post time 2019-12-12 23:57:20

You can use old iphone to connect Hantek to router, and then use Android or Windows PC software

Hantek IDSO1070A Wi-Fi mode.

This post contains more resources

This post contains more resources