Electronic Engineer Discuss

View: 6269|Reply: 1
Print Prev. thread Next thread

Hanteck 1008C USB nor recognized

[Copy link]

1

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Jump to specified page
1#
Post time 2017-9-10 23:31:18 | Show the author posts only Reply Awards |Descending |Read mode
Hi, i have this usb scope. It was working but suddenly it is no longer recognized when connected to any USB port.
It is not a drivers issue, but a physical problem. The unit is powered and led goes green, but no device is shown in devices manager.
I have tested the 3,3 regulator (ok) and i suspect the usb port of MCU stm32f103c8t6 is faulty.
Is it possible to get binaries to replace the bad chip?
Thanks


Reply

Use magic Report

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
2#
Post time 2017-9-12 16:59:14 | Show the author posts only



Sir, I have replyed you via email, please check.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-4-25 08:51 GMT+8 , Processed in 0.159112 second(s), 20 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list