Set as Homepage Add to Favorites

Enable Auxiliary Access Narrow screen

Electronic Engineer Discuss»Forum › (Oscilloscope)示波器 › Automotive Oscilloscope › hantek 1008C oscillator conector

New

View: 9429|Reply: 2

Print

Prev. thread

Next thread

hantek 1008C oscillator conector

2 Threads	4 Posts	4 Credits

Rank: 1

Credits: 4

Send PM

Go to Page No.

Jump to specified page

1^#

Post time 2017-8-15 06:03:36 | Show the author posts only Reply Awards

Reply Awards

|Descending |Read mode

In the oscillator output connector other than the outputs D0 to D7 there are two that say A0 and A1.
What function do they fulfill?
Thank you very much

Favorites0 Shares Collection0

Reply

Use magic Report

167 Threads	2070 Posts	2232 Credits

Rank: 7 Rank: 7 Rank: 7

Credits: 2232

Send PM

2^#

Post time 2017-8-17 09:19:41 | Show the author posts only

These two connectors have no practical significance

Reply Support Not support

Use magic Report

2 Threads	4 Posts	4 Credits

Rank: 1

Credits: 4

Send PM

3^#

Author| Post time 2017-8-19 00:24:14 | Show the author posts only

Thank you
謝謝

Reply Support Not support

Use magic Report

New

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-4-26 01:32 GMT+8 , Processed in 0.161851 second(s), 20 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list