DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)

qwerty250478 · Post time 2016-10-23 22:03:28

Edited by qwerty250478 at 2016-10-23 22:11

DSO5062BM
Thank you for the new firmware released as v3.30.0 (160111.0)!
I looking that Filter utility is working better, but small bug still exist.
How to recreate:
1. Turn device on.
2. Go to the Utility/Filter and enable 'Low Pass' option. SEC/DIV button must be less than 80ms/DIV position at this moment.
3. Slowly turn around SEC/DIV button. At the 80ms/DIV position device will be rebooted.

This bug exist for all filters type, not only for 'Low Pass'.
Please, confirm this bug and send me new firmware if possible.

My DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)
Send me please the new firmware. My mail: qwerty250478@yandex.ru

qwerty250478 · Post time 2016-10-24 21:21:01

amy replied at 2016-10-24 09:55
Sir, we have contact you by email.

My mail: qwerty250478@yandex.ru

qwerty250478 · Post time 2016-10-26 21:26:31

Edited by qwerty250478 at 2016-10-26 21:34

amy replied at 2016-10-26 09:35
Sir, I have sent the latest firmware to your email the day before yesterday. Please check.

Thank you "amy" for firmware for DSO5202BM (dso5kb_func_dso5202bm20161013.up), but I need firmware for DSO5062BM.

qwerty250478 · Post time 2016-10-27 21:18:45

amy replied at 2016-10-27 09:20
Sir, the two are the same.
Also you can register a username and login to download the software on t ...

Thank you "amy".

qwerty250478 · Post time 2016-10-30 00:50:44

Another bug? Check and correct.

qwerty250478 · Post time 2016-10-31 22:15:10

DSO5062BM (firmware 3.30.0 20161013.0, HW 1010x55778344)
Thank you for the new firmware released as v3.30.0 (20161013.0)!
I looking that Filter utility is working better, but small bug still exist.
How to recreate:
1. Turn device on.
2. Go to the "Utility" > "Filter" and enable "Low Pass" > "Apply" option. Go to the "Utility" > "Page 3/3" > "Option" > "Recorder" button device will be rebooted.

This bug exist for all filters type, not only for 'Low Pass'.
Please, confirm this bug and send me new firmware if possible.

My DSO5062BM (firmware 3.30.0 20161013.0, HW 1010x55778344)

My mail: qwerty250478@yandex.ru

qwerty250478 · Post time 2016-11-17 23:23:03

Thank you.

qwerty250478 · Post time 2016-11-19 17:55:05

Please change the format of hours type dd-MMM-yy HH:mm (01-NOV-16 01:59) to dd/MMM/yyyy HH:mm (01/12/2016 01:59)

qwerty250478 · Post time 2016-11-22 23:56:35

Edited by qwerty250478 at 2016-11-23 00:30

I do not want, the date and time on the oscilloscope screen. Remove them from the screen. Also remove the date and time settings from the menu. Please do this for me firmware. Very you please. Installed firmware dso5kb_func_dso5062bm20161105.up
P.S Remove setting the date and time from the menu. Remove the date and time from the screen. Photo below. The clock function in the oscilloscope is not needed !!!!!

qwerty250478 · Post time 2016-11-24 21:14:08

Edited by qwerty250478 at 2016-11-26 21:35

I ask you to remove the date and time of the oscilloscope screen. Or make it possible to disable them. They bother me. Make for me please.
I want instead to see on the screen, the current sample rate and memory depth is used.

DSO5062BM (firmware 3.30.0 160111.0, HW 1010x55778344)

This post contains more resources

This post contains more resources

This post contains more resources