Hantek 1025g

Igor · Post time 2016-8-12 14:50:15

Hello, I have given faulty Hantek 1025g. In it there is no one chip. I found on the Internet a photo of the PCB and determined that it was stm32f103c6t6a.
I would like to repair it and use it, but did not find in their own country Hantek service center. Could you sell me this chip? How much is it? thank

amy · Post time 2016-8-15 11:33:21

Please give me a picture or tell me the bit number of missing component.

Igor · Post time 2016-8-15 14:16:50

U7

Igor · Post time 2016-8-15 14:20:32

amy · Post time 2016-8-16 09:19:39

Dir sir,
Sorry to cause you trouble.
The component (U7) is STM32F103C8,F-QFPx7-G48/N.
You can buy it from amazon.com.
https://www.amazon.com/s/ref=nb_ ... s%2Ck%3ASTM32F103C8

Igor · Post time 2016-8-16 11:53:35

as I understand it is a microcontroller and it has to be programmed. I can find somewhere firmware for it?

amy · Post time 2016-8-16 16:53:51

Edited by amy at 2016-8-16 17:08

Sir,
Sorry to inform that we don't provide the firmware to users.
There are two methods:
1.We can send the programmed chip to you. And you need pay the price of the chip and the freight from China to you. But can not ensure that the device can work normally after welding.
2.You can contact your seller to return to factory maintenance. And you need pay all the freight back and forth.
By the way, please tell me the S/N of teh device.

Igor · Post time 2016-8-16 17:17:01

Edited by Igor at 2016-8-17 00:03

Thank you. Probably the first way will be easier. How much do I will it cost? I am from Belarus.

amy · Post time 2016-8-17 10:25:53

Dir sir,
Please give me your email or send an email to support@hantek.com.

Igor · Post time 2016-8-17 12:37:02

Edited by Igor at 2016-9-1 16:01

harry.pochta gmail.com