Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

12
Return to list New
Author: whsjjd

DSO5102P

[Copy link]

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2016-7-21 16:08:09 | Show all posts
Edited by lemoutan at 2016-7-22 00:28

I've already tried all that. Full uninstall (custom - delete all files and registry entries) and reboot. There is now no trace of the 'DigitalScope' installation on this machine. Only the older Hantek6022BE software.
The ClassGuid for the device driver (5444534f-1100-2008-0218-080111008219 = DSO Measurement Device) as specified in a portion of the driver's inf file (reproduced below):
  1. [Version]
  2. Signature="$CHICAGO[        DISCUZ_CODE_0        ]quot;
  3. Class=USB
  4. ClassGuid = {5444534f-1100-2008-0218-080111008219}
  5. provider=%ODM%
  6. LayoutFile=layout.inf
  7. CatalogFile=dstusb.cat
Copy the Code

is still, however, present in the registry (traces remain under ControlSet001 and ControlSet002 and - fatally - under CurrentControlSet) after reboot, as are also the
  1. HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_049F&PID_505A
Copy the Code
and
  1. HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\VID_049F&PID_505A
Copy the Code
and
  1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_049F&PID_505A
Copy the Code
entries.

These are simply not deletable by hand (e.g via regedit run as administrator) and - as far as I can tell - as long as those entries (for the vendor and device in question) remain then any time the live DSO5102P is plugged into this machine, the association of the equipment with a USB device (specifically the unknown one mentioned in earlier posts) rather than 'Measurement Device' will be made and the new device class creation (the aforementioned DSO Measurement Device) cannot and will not be performed. There seems to be no way out of this on this machine. It seems forever clobbered.

Of course it is possible to install on another (Windows 7 64bit) PC. That doesn't help with this machine - the one I need it on. Somehow these old unremovable registry entries from the (by now obviously mis-installed) earlier attempts are preventing this. This is - as you can imagine - awfully frustrating.

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2016-7-22 13:34:58 | Show all posts
Edited by amy at 2016-7-22 13:36

Dir sir,
If you open an anti-virus software, please close it or replace a computer and try again.
If not, please contact your seller to deal with.

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2016-7-22 22:01:11 | Show all posts
I don't use AV software other than taking care and using the occasional scan to verify a cleanliness I've maintained for over twenty years over several machines.

I'll have to figure out some more drastic measures to remove remaining traces of the driver. If I succeed I will of course let you know.

Thanks for your time.
12
Return to list New
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 10:15 GMT+8 , Processed in 0.185803 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list