Hantek365F Driver

eckels

I have same problem with Hantek 365F on 64 bit Windows 7.  Can't install driver even manually as legacy device and Hantek 365F software says "No usb device found!".

eckels

I should also mention that the driver does not load on my laptop, which is a 32-bit Windows 10 machine.

eckels

amy replied at 2016-10-10 16:04
Sir, please open "Computer Managerment->Device Manager" and give us a screenshot to study.

How do I add an image to the post?

eckels

amy replied at 2016-10-18 11:33
Please click the clip to add the attachment.

Here is a snap shot of the device manager listing from my Windows machine with the Hantek 365F attached through USB cable and turned on.  I am beginning to think that the firmware for the device does not work with a Windows machine but it does work fine with my iPad.

eckels

amy replied at 2016-10-18 11:37
You can register a username on this link: http://hantek.com/en/ProductDetail_9_156.html
Download the ...

I have downloaded the latest driver for my Windows machines.  The date on the drivers seems to be March 30, 2016.  Yes, there is a device manager refresh when plugging in the Hantek 365F.  There is also the beep from the machine after the cable is plugged in and the beep when the cable is removed.  Also, I have tried a different USB cable.  I'm stumped!  Is there just the one version of the firmware in the device?  

eckels

amy replied at 2016-10-31 10:19
Sir, after refresh, can you find a new equipment, as "DMM USB" in other device?
And right cilck "D ...

After the refresh of the device manager page, there is no new device shown especially any saying "DMM USB.  My thinking is that my Hantek 365F is not sending any ID code that Windows can pick up and display.  I have attached a complete display of the device manager screens after the refresh.  All of the tabs have been opened to show all the devices that device manager knows about.

eckels

Unfortunately, Windows won't let me update the driver.  When I try I get the message that
"Windows has determined that the driver software for your device is up to date".

FYI, the date on the driver is quite old, 11/9/2009 with a version no. of 3.0.1.0

Also, I don't see the second listing of the STMicroelectronics Bulk Demo now.  I just see the one without the exclamation point.  But obviously I had it at one time.  Maybe, Windows is happy now but the Hantek365F voltmeter still does not work.  I can run and stop it but no logging of voltages or any changing display of voltage.

eckels

greastick replied at 2016-11-9 18:50
I was facing the same problem too, but it can be fixed!

Windows is automatically installing what it ...

I thank you for your suggestion about altering the Windows policy concerning driver installation.  I never would have thought of that.  After trying your suggestion, Windows still wouldn't let me install the driver until I also altered the policy about "Allow administrators to override Driver Installation Restrictions".  Then I was able to install the Hantek driver and the Hantek device worked perfectly under Windows 7.  

Thanks again for your suggestion.  It certainly pointed me in the right direction.

eckels

Since the Hantek 365F has Bluetooth capability for logging to a iPad, will this device connect to a Windows machine having Bluetooth capability.  My Windows 7 machine will connect to my iPhone via Bluetooth and the Hantek 365F DMM will connect to my iPad using Bluetooth so it seems like the Hantek might connect to my Windows machine via Bluetooth.