Title: Hantek 6022BE - Shorted Diode D1 [Print this page] Author: Michalis Time: 2017-12-12 05:07 Title: Hantek 6022BE - Shorted Diode D1 Hello
I somehow damaged my Hantek 6022BE. When i connect it to my computer, the computer switches off.
This must be a short circuit somewhere, correct?
I measured the D1 and it is shorted. Also, pins 1 and 3 of AMS1117 are shorted. the USB pins and the BNC connector are OK, they are not shorted.
if I remove the D1 diode, the short is gone.
so i suspect that this diode is shorted and I have to replce it. can you please tell me the diode type and code?
is there anything else I can check?
thank you
Author: amy Time: 2017-12-13 16:15
Sir, please check whether there is short circuit between the four pins.
I have checked. There is NO short between the 4 pins.
The model of the D1 is ZMM6V2.
If you can find it, please replace it and check whether there is short circuit between the four pins of the USB cable again. Author: Michalis Time: 2017-12-13 17:16
thank you!
if I cannot find the smd model, is it ok to use a normal 6.2V Zener? Author: amy Time: 2017-12-19 10:37
Sir, You can replace the normal Zener with same function to try.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)