Electronic Engineer Discuss

Title: DSO5102B and new firmware [Print this page]

Author: chaos Time: 2017-10-1 01:45
Title: DSO5102B and new firmware
Hello!
Can I flash to the latest version of DSO5102B? Any new firmware is not visible.

Author: Rainerlan Time: 2020-4-13 03:58
Hi,
I tried to update my DSO5102B from firmware 2.06.3 (130114.0) to dso5kb_func_dso5102b20180226.up
Unfortunately the scope returns the error 0xfe: No upgrade files detected on USB device.
Any thoughts?
The file is on the USB-drive.
I fried both, FAT32 file system & ExtFAT; I always get Error 0xfe.
Please help;)

Author: wangshuang Time: 2020-4-13 10:35

Please download FW from Hantek official page:
http://hantek.com/en/ProductDetail_3_26.html

Author: wangshuang Time: 2020-4-13 10:37

Rainerlan replied at 2020-4-13 03:58
Hi,
I tried to update my DSO5102B from firmware 2.06.3 (130114.0) to dso5kb_func_dso5102b20180226.up ...

I have emailed you, please check email.

Author: Moreira-Br Time: 2021-10-15 02:49
Edited by Moreira-Br at 2021-10-16 22:51

Hi,
I have an DSO5102B and i tried to update with dso5kb_func_dso5102b20190830.up in Hantek website.
This return the error 0xfe: No upgrade files detected on USB device.

SW: 2.06.3 (130114.0)
HW: 10070x555583e9

It seems that the website version is not compatible with my DSO.
Are there any updated firmware versions that are compatible with my DSO?

Author: amy Time: 2021-10-25 16:59

Moreira-Br replied at 2021-10-15 02:49
Hi,
I have an DSO5102B and i tried to update with dso5kb_func_dso5102b20190830.up in Hantek website ...

Please refer to this post.

https://www.eediscuss.com/forum. ... p;extra=&page=1

Because the oscilloscope is too old, there is no guarantee that the oscilloscope can start normally after the upgrade.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)