Electronic Engineer Discuss
Title: Measuring Frequency of CC-650 Current Clamp [Print this page]
Author: Dikson Time: 2017-7-4 14:08
Title: Measuring Frequency of CC-650 Current Clamp
Dear Sir,
We have bought a Hantek CC-650 current clamp from Amazon, it shows that the measuring frequency is up to 20 kHz. However, I found that it is only 400 Hz in your web page, please clarify which one is correct.
Actually, CC-65 and CC-1100 is 20 kHz, not sure if CC-650 is 20 kHz as well.
Best regards,
Author: amy Time: 2017-7-4 14:28
Sir, the bandwidth of CC-650 is 400Hz. If the prequency exceeds the bandwidth range, the measured signal is inaccurate.
Author: Dikson Time: 2017-7-4 16:22
Dear Sir, please advise which model can measure up to 20 khz and 100mA AC current.
Author: amy Time: 2017-7-4 16:35
Sir, CC-65: http://hantek.com/en/ProductDetail_15_77.html
AC/DC frequency range: Up to 20 kHz
Effective Measurement Range: 20mA to 65A DC
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) |
Powered by Discuz! X3.2 |