Electronic Engineer Discuss

Title: Temperature Measurement [Print this page]

Author: ying Time: 2015-11-4 10:07
Title: Temperature Measurement
本帖最后由 ying 于 2015-11-4 10:20 编辑

Hantek365 Bluetooth/USB Data Logger can measure temperature.

1) Click the T key.

2) Connect the black lead into the mA banana jack input and the red lead into the V//Ω/C banana jack input.

3) Connect the red and black test leads to the tested device. The value is shown on the screen.

[attach]277[/attach]

Connect the thermocouple sensor of the metal parts with the tested device. Then, the temperature will be displayed on the screen.

Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)