Title: DSO8060 channel clamps [Print this page] Author: RotthierI Time: 2024-1-9 21:29 Title: DSO8060 channel clamps Hi,During a measurement with a 100x probe, the signal suddenly clamped to a high positive value.
I opened the back of the scope and I can measure this clamping voltage at the input stage using another scope.
Can I get the service manual that explains the disassembly of the main PCB and the schematics of the scope circuit so I can find the root cause of the issue and fix it?
Thanks.
Note I'm an electronics engineer with good knowledge of troubleshooting.
Author: RotthierI Time: 2024-1-30 00:18
Hi,
Can I please get a reply?
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)