Edited by WisdomAugust at 2020-11-13 08:26
Accessthe Built-In Quick Help Toview Quick Help 1 Press Help key to enable the quick help message,then press the key or softkey for which you would like to view help. QuickHelp remains on the screen until another key is pressed or a knob is turned. Help Key help information Open the Help Information bypressing the Help key. The help message will be displayed after pressing the key, softkey, or knob on the front panel. To close the Help Information,simply press the Help key. Default Key help information Press and release immediately theDefault key to perform the selected default settings. Press and hold the Default key, theDefault Menu will be displayed. Default setup - Return the scope toits default settings. Major default settings: Horizontal: normal mode, 100us/divscale, 0s delay. Vertical: channel 1 on, 5V/divscale, DC coupling, 0V position. Trigger: Edge trigger, Auto mode, 0Vlevel, rising edge, 60ns hold off time. Display: 100% grid intensity, 100%waveform brightness, persistence off. Note: The waveform generatorsettings are not affected by Default setup. Factory setup - Reset the scope toits default settings, and delete all settings saved by the user. User setup - Returns the scopesettings to the user saved horizontal, vertical, trigger and display setup.
|