graden Publish time 2017-5-4 19:02:37

HDG2022B Ind. setting of signals

Edited by graden at 2017-5-4 19:03

Have a nice day.

I purchased the generator ndg-2022b. I can not understand how to save individual settings of signal parameters (amplitude, frequency, phase, etc.).
To enable each time you turn on the generator, you can call up individual settings of the signal parameters

Denis



amy Publish time 2017-5-8 11:10:23




Sir, sorry to reply you so late.
The individual settings can't be saved manually. You can press Utility->SysStatus, and press F3 to select <last> to save last time setting. When start up next time, the system is set by last time setting.
Before this, please register a username and login to download the latest software on our official website: http://hantek.com/en/ProductDetail_12_149.html.

graden Publish time 2017-5-12 01:59:35

Thank you, Amy. Very helped me.
In the user's manual there is a chapter telling about the SCPI.
I did not find in the instructions how to apply it, for example: create a file with the program code, and then run on the generator

amy Publish time 2017-5-12 15:12:05

Sir, please install Keysight IO Libraries Suite, and learn some functions of it. You can use it to communicate with the generator.

graden Publish time 2017-8-21 18:08:50

Hello my friends.

Is it possible to return the calibration settings of the generator ndg2022b to the factory (initial) settings?

Denis

amy Publish time 2017-8-23 08:35:30

Sir, sorry, I don't know what calibration settings you sail.
Did you change the initial calibration data?
Pages: [1]
View full version: HDG2022B Ind. setting of signals