okulski Publish time 2019-10-11 21:04:37

i buy hantek 6022bl and need to sniff ide (pATA) password

i make connection betwen ide hard drive and host to data pins 0-8 pins and i dont know how use logic maulti function virtual signal analyzer?


amy Publish time 2019-10-16 13:59:13

You need to click the capture button to capture the data manually.


okulski Publish time 2019-10-16 20:31:20

after press i have 1second and no captured data! how i make capture with strobe signal? i have read signal, write signal and strobe signal.how i make capture spi, i2c, rs-232, i2s interfaces?

amy Publish time 2019-10-21 15:21:12

Oscilloscope and logic analyzer cannot be used at the same time.
Is the oscilloscope part turned on when you click Capture?
If you want to do secondary development, please refer to the SDK solder in CD.

okulski Publish time 2019-10-22 20:21:59

i use only logic analyzer at time.

okulski Publish time 2019-10-22 20:26:25

analyzer not use strobe signal for record or write captured data record in internal(analyzer) memory and internal memory very small!

okulski Publish time 2019-12-9 19:47:57

it is VERY VERY bad device as a logic analyzer!!!!! device not have software for use device! support very bad - cant answear!

amy Publish time 2019-12-12 14:07:17

Sorry, this software may not meet your needs. Please send a message to my email caiyijun@hantek.com.
Pages: [1]
View full version: i buy hantek 6022bl and need to sniff ide (pATA) password