Forum › Automotive Oscilloscope › Hantek 2D82Auto Firmware

Sniperfi Publish time 2019-9-14 11:45:20

Hantek 2D82Auto Firmware

I recently purchased a new 2D82Auto and need to know if I need to update the firmware? There is a firmware file on the web site but no information on what version.My 2d82Auto lists under system a v04

testequipment12 Publish time 2019-9-19 08:34:38

that is the new one

Sniperfi Publish time 2019-9-20 10:57:43

Yes it's the new 2d82Auto.

uncle_sem Publish time 2019-11-8 19:11:32

which is the last version of the firmware with settings save enabled?

amy Publish time 2019-11-13 10:10:22

Please use the software to update.

crystache Publish time 2019-11-17 00:41:30

Please, a little help. I try to upgrade hantek 2d82 but I don't know why it lasts so long. the story is longer because I received the defective device from banggood. I contacted them but they did not respond. did not start. I managed to start it but the menu was a combination of English with Chinese and letters missing.:funk::funk:https://i1353.photobucket.com/albums/q669/crystache22/Capture_zpswt52umoo.png

amy Publish time 2019-11-18 16:16:00

Please confirm the .dfu file is not corrupted.
And upload some pictures of current status to study.

rannokas79 Publish time 2019-11-21 17:34:54

I have same problem.
device not working after trying to update.
program verified that firmware file not corrupted

Pav Publish time 2019-12-23 05:11:38

Edited by Pav at 2019-12-23 08:41

I got this Oscilloscope from Bangood with same buggy firmware ,that didn't display English. It was looking like just random pixels, instead of alpha/numerical characters.

Newer firmware fixed it.

I'll keep it short , and simple. Here's is how I got it fixed in first try.

At first ,it wasn't clear to me how to enter DFU mode so:
1 Remove the battery back cover and remove 2 batteries
2 Unplug the USB cable
3 Press and hold F1, plug in the USB cable and connect to the computer.
4 Release F1 immediately after the lower right corner (RUN/Stop) light flashes <--I released the F1 button just after when I saw the green light on ,|> (the play/pause button on the unit).
5 Click the program "Start" button
**Note, please make sure the computer has successfully installed the DFU driver!

The Hantek website link: Hantek2D82AUTO

This was done with windows 7 64-bit.
The rest info is in the pictures. Please read, before do.
Hope it helps.
Ps: I notest the pictures doesnt show up on some devices. Please let me know if you can't see them below.
Also You have to create an account on this website, and to be loggen in, to see them.


https://live.staticflickr.com/65535/49260864406_5794dd31af_b.jpg

https://live.staticflickr.com/65535/49260389318_b489f70633_b.jpg

https://live.staticflickr.com/65535/49260864316_f4141511b3_b.jpg

https://live.staticflickr.com/65535/49260389383_ddd6bc6135_b.jpg

damion Publish time 2020-2-21 03:12:04

I have Hantek 2D82auto and can not power on, thebattery is fully charge. Any ideas ???

View full version: Hantek 2D82Auto Firmware